Spigot System
€39.28 Tax excluded
€47.53 Tax included
€47.53 Tax included
Spigot System
Stainless steel spigots for frameless glass balustrades: round Ø48 mm and square 50 × 50 mm spigots clamp the glass without drilling, and 325 mm posts with glass adaptors (round Ø42.4 mm, square 40 × 40 mm) hold drilled glass beside the post. All are AISI 304 in a satin finish – choose by whether the glass is drilled and by profile.
There are 4 products.
Spigot System
€42.85 Tax excluded
€51.85 Tax included
€51.85 Tax included
Spigot System
€49.50 Tax excluded
€59.90 Tax included
€59.90 Tax included
Spigot System
€49.50 Tax excluded
€59.90 Tax included
€59.90 Tax included
Showing 1-4 of 4 item(s)
About Spigot Systems
Spigot systems are floor-mounted stainless-steel fittings that hold a glass panel at its lower part, so the glass itself forms the barrier and no full-height posts interrupt the view. The base is bolted to the floor or slab.
Strofix supplies two spigots – round Ø48 mm and square 50 × 50 mm, both 182 mm high – and two 325 mm glass railing posts with glass adaptors that hold drilled glass beside each post: square 40 × 40 mm and round Ø42.4 mm. All are AISI 304 stainless steel with a satin finish.
The right choice depends on whether the glass is drilled (posts with glass adaptors) or not (spigots), and on the profile – round or square.
How to choose a spigot system
1. Drilled or undrilled glass
Spigots clamp undrilled glass 12–17.52 mm thick at its bottom edge. Posts with glass adaptors hold drilled glass 8–17.52 mm thick beside the post with two adaptors – choose them when the glass panels are drilled for point fixings.
2. Profile: round or square
Round spigots (Ø48 mm on a Ø98 mm base plate) and round posts (Ø42.4 mm on a Ø105 mm base plate) suit round handrails and tubes. Square spigots (50 × 50 mm on a 98 × 98 mm base plate) and square posts (40 × 40 mm on a 96 × 96 mm base plate) match square profiles. The choice is visual – match the profile to the other railing components.
3. Mounting and material
All four are floor-mounted: the base plate is bolted to the floor, slab or deck. They are made of AISI 304 stainless steel with a satin finish, which suits interior and typical exterior installations.