Glass railing post 40x40 with glass adaptors, Satin

The Strofix glass railing post 40x40 with glass adaptors is an AISI 304 stainless-steel post for frameless glass railings: a 40 × 40 mm square post, 325 mm high, on a 96 × 96 mm base plate, with two 40 × 40 mm glass adaptors that hold the glass panel beside the post.

The base plate is bolted to the floor or slab. The glass is fixed to the two adaptors, 150 mm apart, through drilled holes, so the panel stands next to the post rather than in a clamping channel. The post is supplied in a satin finish and suits 12–17.52 mm glass. AISI 304 stainless steel is suitable for standard interior and exterior installations. A round Ø42.4 mm version is also available, as are spigots that clamp the glass without drilling.

Use cases:

• Frameless glass railings with drilled glass panels fixed beside the posts
• Balconies, terraces and landings with floor-mounted posts
• Projects that specify point-fixed glass instead of channel clamping

FAQ:

How is the glass fixed?

With the two glass adaptors through drilled holes in the glass. The adaptors are 150 mm apart.

How is the post mounted?

The 96 × 96 mm base plate is bolted to the floor or slab.

What is the height?

325 mm overall.

What glass thickness does it suit?

12–17.52 mm glass.

What steel grade and finish are used?

AISI 304 stainless steel with a satin finish.

About Spigot Systems

Spigot systems are floor-mounted stainless-steel fittings that hold a glass panel at its lower part, so the glass itself forms the barrier and no full-height posts interrupt the view. The base is bolted to the floor or slab.

Strofix supplies two spigots – round Ø48 mm and square 50 × 50 mm, both 182 mm high – and two 325 mm glass railing posts with glass adaptors that hold drilled glass beside each post: square 40 × 40 mm and round Ø42.4 mm. All are AISI 304 stainless steel with a satin finish.

The right choice depends on whether the glass is drilled (posts with glass adaptors) or not (spigots), and on the profile – round or square.