Rubber inlay for glass clamp 52x52mm

The Strofix rubber inlay for glass clamp 52×52 mm is an EPDM rubber gasket designed to fit inside the 52 × 52 mm glass clamp body, gripping the glass panel securely between two gaskets. Available for glass thicknesses of 8, 10, 12, 8.76, 10.76, or 12.76 mm (66.2). Select the glass thickness at order time. Sold individually — two inlays are required per clamp (one on each side of the glass).

The 52 × 52 mm gasket matches the glass range of the 52 × 52 glass clamps, which handle thicker glass panels starting at 8 mm. The 12.76 mm option corresponds to laminated glass designation 66.2 (6+6+0.76 PVB interlayer). This inlay fits all 52 × 52 mm glass clamps in the Strofix range — flat-mount and tube-mount versions in both satin and polished finishes. EPDM rubber provides consistent clamping pressure, cushions the glass against the metal body, and is resistant to weathering, UV exposure, ozone, and temperature extremes.

Use cases:

• Replacement EPDM gasket for 52 × 52 mm glass clamps (flat-mount and tube-mount)
• Changing glass thickness on an existing 52 × 52 clamp by swapping to the correct gasket
• Spare gaskets for clamps ordered in the "without rubbers" option
• Maintaining heavy-duty glass balustrade installations with 52 × 52 clamps

FAQ

What glass thicknesses are available?

Six options: 8, 10, 12 mm single tempered glass and 8.76, 10.76, 12.76 mm laminated safety glass. The 12.76 mm option corresponds to laminated designation 66.2.

How many inlays do I need per clamp?

Two inlays per clamp — one on each side of the glass panel.

Which glass clamps does this fit?

This inlay fits all 52 × 52 mm glass clamps in the Strofix range: flat-mount (satin and polished) and tube-mount Ø42.4 (satin) versions.

What material is the inlay?

EPDM rubber, resistant to weathering, UV, ozone, and temperature extremes.

Can I use this in the 45×45 or 55×55 clamps?

No. Each clamp size requires its own gasket size. The 52 × 52 inlay fits 52 × 52 clamps only.

About Rubbers for Glass Clamps

A rubber inlay for a glass clamp is a replaceable insert that sits between the metal clamp body and the glass panel, cushioning the clamping pressure, preventing direct steel-to-glass contact and compensating for the specific panel thickness.

Each rubber pair is shaped to match a particular Strofix clamp model, ensuring a snug fit inside the clamp channel. Strofix supplies rubber inlays for all of our clamp models — with thickness options covering single-pane glass at 4, 6, 8, 10 and 12 mm and laminated glass at 12.76 mm (66.2) and 16.76 mm (88.2).

Rubbers are sold individually so that an existing clamp can be reconfigured for a different glass thickness or worn inserts can be replaced without changing the clamp body itself.