Rubber inlay for front glass clamp 60mm

The Strofix rubber inlay for front glass clamp 60 mm is an EPDM rubber gasket designed to fit inside the Ø60 mm front-fixing glass clamp body. Available for glass thicknesses of 8, 10, or 12.76 mm (66.2). Select the glass thickness at order time. Sold individually — two inlays are required per clamp (one on each side of the glass).

The "front glass clamp" is a different mounting style from the standard side-clamping glass clamps in the Strofix range. A front-fixing clamp mounts from the front face of the glass panel with a circular Ø60 mm profile. The EPDM rubber gasket cushions the glass between the clamp faces and prevents direct metal-to-glass contact. The 12.76 mm option corresponds to laminated glass designation 66.2 (6+6+0.76 PVB interlayer). EPDM is resistant to weathering, UV exposure, ozone, and temperature extremes, making it suitable for both interior and exterior installations.

Use cases:

• Replacement EPDM gasket for the Ø60 mm front-fixing glass clamp
• Changing glass thickness on an existing front glass clamp by swapping to the correct gasket
• Spare gaskets for front-fixing clamp installations
• Maintaining front-fixing glass balustrade and partition installations

FAQ

What glass thicknesses are available?

Three options: 8 mm and 10 mm single tempered glass, and 12.76 mm laminated safety glass (66.2 designation).

What is a front glass clamp?

A front-fixing glass clamp mounts from the front face of the glass panel with a circular Ø60 mm profile. This is a different mounting style from the standard side-clamping glass clamps (30×30, 45×45, 52×52, etc.) that grip the glass from above and below.

How many inlays do I need per clamp?

Two inlays per clamp — one on each side of the glass panel.

Can I use this in the standard side-clamping glass clamps?

No. This gasket is specific to the Ø60 mm front-fixing glass clamp and is not interchangeable with any of the rectangular or square side-clamping gaskets.

What material is the inlay?

EPDM rubber, resistant to weathering, UV, ozone, and temperature extremes.

About Rubbers for Glass Clamps

A rubber inlay for a glass clamp is a replaceable insert that sits between the metal clamp body and the glass panel, cushioning the clamping pressure, preventing direct steel-to-glass contact and compensating for the specific panel thickness.

Each rubber pair is shaped to match a particular Strofix clamp model, ensuring a snug fit inside the clamp channel. Strofix supplies rubber inlays for all of our clamp models — with thickness options covering single-pane glass at 4, 6, 8, 10 and 12 mm and laminated glass at 12.76 mm (66.2) and 16.76 mm (88.2).

Rubbers are sold individually so that an existing clamp can be reconfigured for a different glass thickness or worn inserts can be replaced without changing the clamp body itself.