Handrail fitting - 40x40mm, Flat, Satin, Adjustable

The Strofix handrail fitting, adjustable, flat is a stainless-steel connector with an adjustable support plate that joins handrail sections in a straight run while allowing the rail angle to be set. It is made from 40 × 40 × 2 mm square section, with a flat profile suited to flat-topped or square rails. Manufactured from AISI 304 stainless steel with a satin finish.

This is the adjustable version of the straight 40 × 40 mm square-section handrail fitting. Its adjustable support plate lets the rail angle be set, making it suited to raked or sloped runs such as staircases, where the handrail follows an incline. The fixed version of the same fitting holds a set geometry. Made from 40 × 40 mm square section with a 2 mm wall, it is supplied as a bonded/pasted element for joining the rail sections. The flat profile matches flat or square handrail.

Use cases:

• Joining flat or square handrail sections with an adjustable angle
• Adjustable in-line connector for 40 × 40 mm square-section handrail on stairs
• Continuing a handrail line on a raked or sloped run
• Angle-adjustable straight rail joint in a post-mounted handrail system
• Stainless-steel adjustable handrail fitting for flat-profile rails

FAQ

What makes this fitting adjustable?

It has an adjustable support plate that lets the rail angle be set, suited to raked or sloped runs such as staircases. The fixed version holds a set geometry instead.

What section is it made from?

40 × 40 × 2 mm square section (40 × 40 mm outer dimension, 2 mm wall).

What handrail profile does it suit?

Flat-topped or square rails. The flat profile matches a 40 × 40 mm square handrail.

How is it joined to the rail?

It is supplied as a bonded/pasted element for joining the handrail sections.

What steel grade is used?

AISI 304 stainless steel with a satin finish.