Quick View
Square profile 40x40x2mm, 2000mm - 3000mm, Satin
€47.53
Previous
Next
End crossbar holder for 12mm, Right, Flat, Satin
€1.86 Tax excluded
€2.25 Tax included
€2.25 Tax included
Tax included
Quantity
| Steel grade | AISI304 |
|---|---|
| Surface finish | Satin |
| Mounting surface type | Flat |
| Screw size | M6 |
| Diameter | ø 12mm |
| Crossbar hole type | Right |
| Holder diameter | ø 22mm |
The Strofix end crossbar holder for 12mm, Right, Flat, Satin is an AISI 304 stainless-steel fitting that terminates a horizontal Ø12 mm crossbar (infill rod) against a flat mounting surface. It mounts on a flat surface and holds the end of the rod in a blind hole – a bore that receives the rod but does not pass through – for the right-hand end of a railing run. Satin finish, with fixing screws included.
An end crossbar holder closes off the end of a rod infill where the run meets an end post or wall. Unlike the through-hole crossbar holder, which lets the rod pass straight through at intermediate positions, this blind-hole holder caps the rod end cleanly, concealing the cut end inside the fitting. The "right" designation identifies the hand of the holder for the right end of a run; a matching left-hand version completes the pair. It fixes to any flat surface – a post face, stringer, or wall – with the included screws.
Use cases:
- Terminating a Ø12 mm infill rod at the right-hand end of a railing run
- Blind-hole rod end at an end post or wall
- Concealing the cut end of an infill rod inside the fitting
- Flat-mount rod termination on a post face, stringer, or wall
- Stainless-steel end crossbar holder for railing infill rod
FAQ
How does an end crossbar holder differ from a crossbar holder?
A through-hole crossbar holder lets the rod pass straight through at intermediate positions. This end crossbar holder has a blind hole that receives and caps the rod end, used where the run terminates.
What does "right" mean?
It identifies the hand of the holder – this is for the right-hand end of a railing run. A matching left-hand version is available for the other end.
What crossbar diameter does it fit?
Ø12 mm rod.
What surface does it mount to?
A flat surface – a post face, stringer, or wall. Fixing screws are included.
What finishes and grades are available?
Satin (this product), in AISI 304.
About Crossbar Holders
A crossbar holder is a stainless-steel fitting that carries a horizontal Ø12 mm rod on a railing post or a flat surface. At intermediate posts the rod runs through the holder; at end posts it ends in a left or right holder with a blind hole.
Strofix supplies 16 crossbar holders: eight for flat surfaces and eight for Ø42.4 mm round posts – through, left and right end, connecting, front and adjustable front holders, plus a vertical holder and a holder for 1.5–4 mm glass – in AISI 304 (one through holder also in AISI 316), satin or polished, all for Ø12 mm rods.
The correct holder depends on the post profile, the position in the railing run and whether the crossbar follows a stair.
Strofix quality
Strofix designs and supplies stainless-steel fastening systems for architectural glass, including glass adaptors, railing components, handrails, and structural fixings. We also serve architects, installers, and building contractors on residential and commercial projects.
The products we sell are designed by us, and manufactured under strict quality guidelines so that we can be sure our customers are getting exactly what they ordered.
All of our products meet EU quality standards. Our shipping partners provide convenient delivery times. For more on our return & warranty policy read here. Secure payments are provided by MakeCommerce.
Related Products
