Bar 12mm, 3000mm, Raw

The Strofix bar 12mm, 3000mm, Raw is a solid Ø12 mm round bar in AISI 304 stainless steel, supplied in a 3000 mm length with a raw surface. It is cut-to-length raw stock for railing infills and frames – the installer trims it to the required dimensions on site.

Solid round bar functions as the horizontal rod infill between railing posts, forming the in-fill bars of a balustrade, and as crossbar or frame material. At Ø12 mm it pairs with the Ø12 mm rod elbows, bends and end caps in the range. The raw surface is unfinished stock, to be worked, finished, or coated as the project requires. AISI 304 stainless steel suits standard interior and exterior installations.

Use cases:

• Horizontal rod infill between railing posts
• Crossbar or frame material in balustrade systems
• Cut-to-length raw stock trimmed on site
• Ø12 mm rod runs using matching rod elbows, bends, and end caps
• Solid-bar infill in stainless-steel railing frames

FAQ

What is this product?

A solid Ø12 mm round bar, 3000 mm long, in AISI 304 stainless steel with a raw surface – raw stock for railing infills and frames.

What is it used for?

As horizontal rod infill between railing posts, and as crossbar or frame material. It is cut to length on site.

What diameters are available?

Ø12 mm. It pairs with the Ø12 mm rod elbows, bends, and end caps in the range.

What grades are available?

AISI 304.

Why is the surface raw?

It is unfinished raw stock, to be worked, finished, or coated as the project requires.

About Pipes & Bars

Pipes and bars are the stainless-steel raw-stock components used to build handrails, railing infills and structural frames in balustrade systems. Round pipes serve as handrails and post tubes, square tubes form flat-sided posts and handrails, and solid bars function as horizontal rod infills between railing posts.

The category includes a round pipe in AISI 304 & 316 stainless steel with a satin finish (2000 and 3000 mm length), a square tube in AISI 304 & 316 with a satin finish (2000 and 3000 mm length), a solid Ø12 mm bar in AISI 304 with a raw surface (3000 mm length) and pre-drilled post tubes 40 × 40 and Ø42.4 mm (880 or 980 mm, AISI 304 & 316).

These are cut-to-length stock items that the installer trims to the required dimensions on site. The correct product depends on the railing component being built, the required profile shape and the steel grade.