Connector Y for pipe 42.4 x 2mm, Satin

The Strofix fitting – tee corner is an AISI 304 stainless-steel three-way corner junction for Ø42.4 × 2 mm railing tubes. The fitting combines a 90° elbow turn with a perpendicular tee branch, creating three tube connection points at a single corner location. The fitting has a 30 mm height (H) and is supplied in satin finish. Attached using adhesive (elements for pasting included).

The tee corner is used where a handrail or top rail changes direction by 90° and simultaneously branches off to a third tube run – for example, at a balcony corner where the railing continues in two perpendicular directions while a third tube descends or extends to another level. The three openings accept Ø42.4 mm tubes: two form the 90° corner and the third provides the perpendicular branch. The fitting sleeves over all three tube ends internally, maintaining the flush profile with no visible hardware on the outside. AISI 304 stainless steel is suitable for standard interior and exterior installations.

The satin finish provides a uniform appearance that matches other Strofix satin-finished railing and handrail components.

Use cases:

• Balcony railing corners where a third tube branches from the corner junction
• Staircase landing junctions where the handrail turns 90° and a branch continues to the next flight
• Three-way railing intersections at corner locations
• Top rail corner junctions with a perpendicular infill tube or secondary handrail branch
• Any Ø42.4 mm railing configuration requiring a corner turn plus a third branch at the same point

FAQ:

What tube does this fitting fit?

The tee corner fits the Ø42.4 × 2 mm round tube – the standard railing pipe in the Strofix product range.

How many tubes does this fitting connect?

The tee corner connects three tubes: two form a 90° corner (like an elbow) and the third branches off perpendicularly from the corner junction.

What is the fitting height?

The fitting has a 30 mm height (H = 30 mm).

How does this differ from a standard tee "T"?

The tee "T" connects three tubes in a T-shape: one tube runs straight through and a third branches off at 90° from the middle. The tee corner has two tubes meeting at a 90° corner (not straight through) with the third branching perpendicularly from that corner. Use the tee "T" for mid-run branches; use the tee corner for end-of-run corner branches.

How does this differ from a simple 90° elbow?

A 90° elbow connects two tubes at a right angle. The tee corner adds a third perpendicular tube branch at the same corner junction, making it a three-way connector rather than a two-way connector.

How is the fitting attached?

The fitting is secured using adhesive (pasting). The Strofix anaerobic glue (50 mL) is the recommended adhesive.

About Strofix pipe connectors

Strofix pipe connectors join Ø42.4 mm railing tube, 40x40 mm square profile and Ø10/Ø12 mm solid rod. The range covers L-type elbows, fixed and adjustable, I-type straight connectors, and T, Y and X connectors, in AISI 304 stainless steel with AISI 316 on selected fittings.

Compare all types in pipe connectors and elbows.