Connector T for pipe 42.4 x 2mm, Satin

The Strofix fitting – tee "T" is an AISI 304 stainless-steel three-way T-shaped junction for Ø42.4 × 2 mm railing tubes. The fitting connects three tubes in a T configuration: one tube runs straight through the fitting and a third tube branches off at 90° from the mid-point. The fitting has a 60 mm height (H) and is supplied in satin finish. Attached using adhesive (elements for pasting included).

The tee "T" is used wherever a perpendicular tube branch is needed along a straight run of handrail or top rail – for example, where a secondary handrail branches off from the main run, or where an infill tube connects perpendicularly to a horizontal rail at a mid-span position. The T-shaped geometry maintains the straight-through tube alignment while adding the 90° side branch. The fitting sleeves over all three tube ends internally, maintaining the flush profile with no visible hardware on the outside. AISI 304 stainless steel is suitable for standard interior and exterior installations.

The satin finish provides a uniform appearance that matches other Strofix satin-finished railing and handrail components.

Use cases:

• Mid-run perpendicular branches on Ø42.4 mm handrails and top rails
• Secondary handrail branches from a main handrail run
• Infill tube connections at 90° to a horizontal rail mid-span
• Three-way T-junctions in railing frameworks
• Any Ø42.4 mm tube configuration requiring a straight-through run with a perpendicular side branch

FAQ:

What tube does this fitting fit?

The tee "T" fits the Ø42.4 × 2 mm round tube – the standard railing pipe in the Strofix product range.

How many tubes does this fitting connect?

The tee "T" connects three tubes: two form a straight-through run (in-line) and the third branches off at 90° from the mid-point of the straight run.

What is the fitting height?

The fitting has a 60 mm height (H = 60 mm). This is taller than the tee corner (H = 30 mm) because the straight-through tube needs additional length within the fitting body.

How does this differ from the tee corner?

The tee "T" has a straight-through tube run with a perpendicular side branch – used at mid-run positions where the main tube continues in both directions. The tee corner has two tubes meeting at a 90° corner with a perpendicular branch – used at end-of-run corner positions. Choose based on whether the main tube continues straight through (tee "T") or turns a corner (tee corner).

How is the fitting attached?

The fitting is secured using adhesive (pasting). The Strofix anaerobic glue (50 mL) is the recommended adhesive.

What steel grade and finish is used?

The fitting is manufactured from AISI 304 stainless steel with a satin finish. AISI 304 is suitable for standard interior and exterior installations.

About Strofix pipe connectors

Strofix pipe connectors join Ø42.4 mm railing tube, 40x40 mm square profile and Ø10/Ø12 mm solid rod. The range covers L-type elbows, fixed and adjustable, I-type straight connectors, and T, Y and X connectors, in AISI 304 stainless steel with AISI 316 on selected fittings.

Compare all types in pipe connectors and elbows.