Glass clamp 60x50mm final, Flat, Satin

The Strofix front glass clamp 60 × 50 mm, final, flat is the end clamp of the square front glass clamp family. The back plate is fixed to a wall, slab edge or square post, the front plate presses the glass against it through rubber inlays, and the glass runs in front of the post or wall. The "final" version holds the last panel edge at the end of a run or at a corner. The clamp measures 60 × 50 × 28 mm and holds glass panels from 8 to 12.76 mm thick. Manufactured from AISI 316 stainless steel with a satin finish. Fixed with an M8 countersunk screw (DIN 7991).

Glass thickness options include 8, 10 and 12 mm single tempered glass and 8.76, 10.76 and 12.76 mm laminated safety glass (44.2, 55.2 and 66.2). When a glass thickness is selected, two EPDM rubber inlays are included, one on each side of the glass; a "without rubbers" option is available for ordering the clamp body only. The glass does not need to be drilled. Where two panels meet in one line, use the 60 × 60 mm 180° clamp (middle clamp) of the same family.

Select the glass thickness at order time.

Use cases:

• End of a glass balustrade run with the glass in front of the posts or the wall
• Corners where the glass panel ends
• Fixing to walls, slab edges and square posts
• Installations near the sea, around outdoor pools or where de-icing salt is used

FAQ

What does "final" mean?

"Final" is the end clamp: it holds the last panel edge at the end of a run or at a corner. The 180° clamp is the middle clamp – it holds the edges of two adjacent panels where they meet.

What glass thicknesses are supported?

The clamp accepts glass from 8 to 12.76 mm: single tempered glass (8, 10, 12 mm) and laminated safety glass (8.76, 10.76, 12.76 mm / 44.2, 55.2, 66.2).

How does it differ from a standard glass clamp?

A standard glass clamp holds the panel edge beside the post, so the glass sits between the posts. A front glass clamp holds the glass from its face, so the glass runs in front of the posts or the wall.

What is it fixed to and with what?

The back is flat, for walls, slab edges and square posts. The clamp is fixed with an M8 countersunk screw (DIN 7991). For Ø42.4 mm round tube, use the 60 × 60 mm final clamp for Ø42.4.

Why is this AISI 316 only?

The square front glass clamps are made in AISI 316. It resists chlorides better than AISI 304 – the choice near the sea, around outdoor pools or where de-icing salt is used.