Glass clamp 90x25x33mm, 16.76-17.52mm, Satin, 180°

The Strofix glass clamp 90×25×33 mm, 180° is a stainless-steel glass-to-glass joint clamp with a low-profile bar shape for connecting two thick laminated glass panels in a straight line (180° alignment). The clamp measures 90 × 25 × 33 mm (L × H × depth) and holds glass panels from 16.76 to 17.52 mm thick. Manufactured from AISI 304 stainless steel with a satin finish. It joins the two panels to each other and is not fixed to a wall or post.

This is the heaviest-glass version of the 90 × 25 mm low-profile 180° joint clamp. The 16.76–17.52 mm glass range covers heavy laminated safety glass – 16.76 mm (88.2 designation, two 8 mm panes with 0.76 mm PVB) and 17.52 mm. The 33 mm depth is deeper than the 28 mm depth on the standard 90 × 25 mm clamp (10–12.76 mm), accommodating the thicker glass within the same low 25 mm profile height. The 90 mm length provides a wide grip area while the slim height keeps the joint detail discreet.

Use cases:

• Low-profile glass-to-glass inline joint for heavy laminated glass (16.76–17.52 mm)
• Joining two thick glass panels in a straight line (180°) with a discreet bar
• Glass balustrades with 88.2 laminated glass joints
• 180° joints where thick glass and a slim profile are both required
• Continuous thick-glass balustrade runs with minimal visual joint height

FAQ

What glass thicknesses are supported?

Two options within the range: 16.76 mm (88.2 laminated, two 8 mm panes with 0.76 mm PVB) and 17.52 mm laminated safety glass. Only the 103 × 40 mm 180° clamp takes thicker glass (up to 21.52 mm).

How does this compare to the standard 90×25 mm 180° clamp?

The standard 90 × 25 × 28 mm clamp handles 10–12.76 mm glass. This 90 × 25 × 33 mm clamp handles thicker 16.76–17.52 mm glass with a deeper 33 mm body (versus 28 mm) to accommodate the extra thickness, while keeping the same low 25 mm profile height.

What are the clamp dimensions?

The clamp is 90 × 25 × 33 mm (L × H × depth). The 25 mm height keeps this a low-profile joint clamp despite the thick glass capacity.

What steel grade is used?

AISI 304 stainless steel with a satin finish.

Is the clamp fixed to a wall or post?

No. It joins two glass panels to each other and has no fixing to a wall or post. To fix a glass panel to a wall, use a wall clamp from the same category.

Both joined panels must be the same thickness?

Yes. Both glass panels at the joint must be the same thickness for even gasket contact on both sides.

About Connector Glass Clamps

A connector glass clamp is a stainless-steel bracket that joins two glass panels at a fixed angle without requiring an intermediate post between them. It clamps two panel edges simultaneously – either in a straight 180° inline configuration or at a 90° corner – creating a continuous glass run around corners or across panel joints.

Strofix supplies connector glass clamps in many variants: 180° inline clamps, 90° corner clamps, and wall clamps. Each clamp is available to suit different panel thicknesses and installation requirements.

The correct connector clamp depends on the angle between the two panels and the body style that matches the railing layout.