Glass clamp 103x40x25mm, 16.76-21.52mm, Satin, 180°

The Strofix glass clamp 103×40×25 mm, 180° is a stainless-steel glass-to-glass joint clamp with a wide bar profile for connecting the thickest glass panels in a straight line (180° alignment). The clamp measures 103 × 40 × 25 mm (L × H × depth) and holds glass panels from 16.76 to 21.52 mm thick. Manufactured from AISI 316 stainless steel with a satin finish. It joins the two panels to each other and is not fixed to a wall or post.

This is the heaviest-glass 180° joint clamp in the Strofix range, covering glass from 16.76 mm up to 21.52 mm – the maximum glass thickness in the entire Strofix product line. The glass options include 16.76 mm (88.2 laminated), 17.52 mm, and 21.52 mm laminated safety glass. The 103 mm length provides a wide grip area to distribute the load of these heavy panels, and the marine-grade AISI 316 stainless steel suits high-specification glass balustrade joints. This clamp is used where two ultra-thick glass panels meet inline in a continuous balustrade run, typically in high-specification commercial projects.

Use cases:

• Glass-to-glass inline joint for the thickest glass (16.76–21.52 mm)
• Joining two ultra-thick laminated glass panels in a straight line (180°)
• Thick-glass balustrade joints in commercial projects
• 180° joints requiring AISI 316 and maximum glass thickness capacity
• Continuous glass balustrades with the heaviest laminated glass panels

FAQ

What glass thicknesses are supported?

Glass from 16.76 to 21.52 mm: 16.76 mm (88.2 laminated), 17.52 mm, and 21.52 mm laminated safety glass. Up to 21.52 mm is the maximum glass thickness in the Strofix range.

How does this compare to the other thick-glass 180° clamps?

The 90 × 25 × 33 mm clamp handles 16.76–17.52 mm (AISI 304). This 103 × 40 × 25 mm clamp extends to 21.52 mm (AISI 316) with a wider, taller body. Choose this clamp for the thickest 21.52 mm glass and marine-grade steel.

What are the clamp dimensions?

The clamp is 103 × 40 × 25 mm (L × H × depth).

What steel grade is used?

AISI 316 stainless steel with a satin finish – marine grade, suitable for coastal and high-humidity installations.

Is the clamp fixed to a wall or post?

No. It joins two glass panels to each other and has no fixing to a wall or post. To fix a glass panel to a wall, use a wall clamp from the same category.

Both joined panels must be the same thickness?

Yes. Both glass panels at the joint must be the same thickness for even gasket contact on both sides.

About Connector Glass Clamps

A connector glass clamp is a stainless-steel bracket that joins two glass panels at a fixed angle without requiring an intermediate post between them. It clamps two panel edges simultaneously – either in a straight 180° inline configuration or at a 90° corner – creating a continuous glass run around corners or across panel joints.

Strofix supplies connector glass clamps in many variants: 180° inline clamps, 90° corner clamps, and wall clamps. Each clamp is available to suit different panel thicknesses and installation requirements.

The correct connector clamp depends on the angle between the two panels and the body style that matches the railing layout.