Glass clamp 45x72mm, 10-12.76mm, Satin, 90°

The Strofix glass clamp 45×72 mm, 90° (10–12.76 mm) is a stainless-steel glass-to-glass corner clamp for connecting two thick glass panels meeting at a right angle (90°). The clamp measures 45 × 72 mm and holds glass panels from 10 to 12.76 mm thick. Manufactured from AISI 304 stainless steel with a satin finish. It joins the two panels to each other and is not fixed to a wall or post.

This clamp creates a 90° corner joint for thick glass panels – used where a glass balustrade or enclosure turns a right-angle corner with 10 mm or thicker glass. It is the thick-glass-focused variant of the 45 × 72 mm 90° corner clamp: this version covers 10–12.76 mm, while the companion 45 × 72 version covers a wider 8–12.76 mm range. The clamp grips both panel edges at the corner, maintaining the right-angle alignment. Glass thickness options include 10 and 12 mm single tempered glass and 10.76 and 12.76 mm laminated safety glass (55.2 and 66.2).

Use cases:

• 90° corner joint for thick glass panels (10–12.76 mm) in a balustrade or enclosure

• Glass balustrade runs that turn a right-angle corner with heavy glass
• Glass enclosure corners requiring 12 mm or laminated 12.76 mm glass
• Thick-glass corner connection
• Heavy glass corner joints in commercial installations

FAQ

How does this differ from the other 45×72 mm 90° corner clamp?

Both are 45 × 72 mm AISI 304 satin 90° corner clamps. This version (SKU ST-0457210) covers 10–12.76 mm glass; the companion version (SKU ST-045720) covers a wider 8–12.76 mm range. Choose this version when the glass is 10 mm or thicker.

What glass thicknesses are supported?

The clamp accepts glass from 10 to 12.76 mm: 10 and 12 mm single tempered glass and 10.76 and 12.76 mm laminated safety glass (55.2 and 66.2). Both joined panels must be the same thickness.

What does "90°" mean?

90° refers to the angle between the two glass panels – they meet at a right angle, forming a corner.

What are the clamp dimensions?

The clamp is 45 × 72 mm.

What steel grade is used?

AISI 304 stainless steel with a satin finish.

Is the clamp fixed to a wall or post?

No. It joins two glass panels to each other and has no fixing to a wall or post. To fix a glass panel to a wall, use a wall clamp from the same category.

About Connector Glass Clamps

A connector glass clamp is a stainless-steel bracket that joins two glass panels at a fixed angle without requiring an intermediate post between them. It clamps two panel edges simultaneously – either in a straight 180° inline configuration or at a 90° corner – creating a continuous glass run around corners or across panel joints.

Strofix supplies connector glass clamps in many variants: 180° inline clamps, 90° corner clamps, and wall clamps. Each clamp is available to suit different panel thicknesses and installation requirements.

The correct connector clamp depends on the angle between the two panels and the body style that matches the railing layout.