Flush elbow round for pipe 42.4 x 2mm, Polished, 135°

The Strofix flush elbow round for pipe 42.4 × 2mm, Polished, 135° is an AISI 304 stainless-steel fixed 135° flush angle for Ø42.4 × 2 mm round railing tube. It joins two tube sections at a fixed 135° angle, with a flush, weld-free joint on the visible surface. The elbow is 44 mm high and is supplied in a polished (mirror) finish.

This fixed-angle elbow turns a round-tube rail through an obtuse 135° angle – the angle found on chamfered or splayed corners, bay layouts, and octagonal plans – rather than a square 90° corner. Because the angle is fixed (not adjustable), it gives a clean, repeatable 135° turn. The flush design sleeves over the tube ends, so the outside profile is smooth with no visible bracket or clamp. The polished finish matches polished tube and fittings. A satin version and other fixed angles are also available.

Use cases:

• Turning a Ø42.4 mm round-tube rail through a fixed 135° angle
• Chamfered, splayed, or bay corners where faces meet at 135°
• Octagonal or angled balustrade plans
• Polished-finish flush corner matching polished tube and fittings
• Clean, repeatable 135° flush joint without welding

FAQ

What tube does this elbow fit?

The Ø42.4 × 2 mm round tube – the standard railing pipe in the Strofix range.

What angle does it form?

A fixed 135° angle – an obtuse corner, as found on chamfered or splayed plans. It is not adjustable.

What does "flush" mean?

The elbow sleeves over the tube ends for a smooth, uninterrupted joint surface, with no visible bracket or clamp on the outside.

What is the elbow height?

44 mm (H = 44 mm).

What finish and grades are available?

This is the polished version. A satin version is also offered, and grade options (AISI 304 / AISI 316) are available on selected variants.

How is it fixed?

It is a flush fitting secured with adhesive – no welding is required.

About Strofix pipe connectors

Strofix pipe connectors join Ø42.4 mm railing tube, 40x40 mm square profile and Ø10/Ø12 mm solid rod. The range covers L-type elbows, fixed and adjustable, I-type straight connectors, and T, Y and X connectors, in AISI 304 stainless steel with AISI 316 on selected fittings.

Compare all types in pipe connectors and elbows.