Flush elbow for pipe 42.4 x 2mm, Polished, 90°

The Strofix flush angle (90°) is an AISI 304 stainless-steel fixed right-angle connector for Ø42.4 × 2 mm round railing tubes. The fitting creates a smooth, flush-profile 90° corner joint between two round tube sections. Supplied in satin finish. Attached using adhesive (elements for pasting included).

The flush angle sleeves over the ends of two round tubes at a fixed 90° angle, creating a clean right-angle turn for handrails, top rails, and other round tube railing elements. The "flush" design encloses the tube ends internally, so the external surface at the joint is smooth and continuous with no visible bracket or clamp. The fixed 90° angle is used for standard horizontal-to-vertical transitions, balcony corners, and level handrail direction changes. The tube size options cover the standard Ø42.4 mm railing pipe. AISI 304 stainless steel is suitable for standard interior and exterior installations.

The satin finish provides a uniform appearance that matches other Strofix satin-finished railing components.

Use cases:

• Right-angle corners on Ø42.4 round handrails and top rails
• Balcony railing corner turns with round tube profiles
• Horizontal-to-vertical round tube transitions at railing ends
• Level direction changes at 90° in round tube railing systems
• Clean, flush-profile corner joints without visible hardware on round tubes

FAQ:

What tube sizes does this fitting fit?

Two tube sizes are available: Ø42.4 × 2 mm.

What is the fitting height?

Both tube sizes have the same 35 mm height (H = 35 mm).

What is the angle?

The angle is a fixed 90°. It cannot be adjusted. For variable-angle connections with round tube, use the adjustable flush elbows in the Strofix Pipe connectors category (available in H = 47 mm and H = 27 mm versions for Ø42.4 mm tube).

How does this compare to the 40 × 40 mm square tube flush elbow (90°)?

A fixed 90° flush joint. This product fits round tubes (Ø42.4/48.3 mm) with a 35 mm height. The square tube version fits 40 × 40 mm tube with a 45 mm height. Choose based on the tube profile in the railing system.

How is the fitting attached?

The fitting is secured using adhesive (pasting). The Strofix anaerobic glue (50 mL) is the recommended adhesive.

What steel grade and finish is used?

The fitting is manufactured from AISI 304 stainless steel with a satin finish. AISI 304 is suitable for standard interior and exterior installations.

About Strofix pipe connectors

Strofix pipe connectors join Ø42.4 mm railing tube, 40x40 mm square profile and Ø10/Ø12 mm solid rod. The range covers L-type elbows, fixed and adjustable, I-type straight connectors, and T, Y and X connectors, in AISI 304 stainless steel with AISI 316 on selected fittings.

Compare all types in pipe connectors and elbows.